Dap Weldwood Contact Cement

Dap Contact Cement 3 oz Weldwood

• Stir Contact Cement thoroughly with a standard paint paddle or stirring stick.
• Pre-fit all parts before applying Contact Cement.
• Both surfaces must be clean, dry and free of foreign material. Painted or non-porous surfaces must be roughened before adhesive is applied.
• Using a paint brush, short nap roller or finishing trowel, apply an even coat of adhesive to both surfaces.
• Allow both surfaces to dry 15 to 20 minutes (dependent on temperature and humidity). Dry Contact Cement will feel tacky and appear glossy.
• Align surfaces into exact position and press together, moving from one end to the other to avoid bubbles.
• No clamping required. Contact Cement bonds permanently when sufficient pressure is applied and reaches maximum holding strength in 7 days.

Weldwood Original Contact Cement is a multi-purpose neoprene rubber adhesive that forms instant, high-strength bonds on a variety of surfaces. This adhesive offers hundreds of uses for the home, office, and workshop. Gel forms strong bond on contact to eliminate the need for clamps, temporary fasteners, and long set times.