GSCIT Club Melamine Edge Banding 3/4 inch x 25ft with Hot Melt Adhesive Pre-glued Flexible

GSCIT Club Black Edge Banding, 3/4 inch x 50ft Melamine Edge Banding with Hot Melt Adhesive Pre-Glued Edge Banding Flexible Edging for Plywood

√【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice. √【UPGRADE DESIGN】- The size of Edge Banding is 3/4 inch x 50ft, and the thickness is 0.5mm, It’s suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.5mm thickness can let you easy to do. √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it. What Is Edge Banding /b br Edge bandingis a thin material used to seal the exposed and raw edges ofplywood. br Heat sensitive adhesive on one side is applied to the board while the other side acts as a barrier against dirt and moisture. br Edgebandingis mainly done to coverplywood sidesin order to match acabinet’s finished look, but it also protects theinner plywoodfrom possibly warping. br br Overview:? Benefits And Edge Banding Materials /b br Edge banding is a strip of wood veneer with heat sensitive adhesive on one side. br With a roll of wood veneer edge banding and a few simple tools, you can cover raw plywood edges so the plywood is nearly indistinguishable from solid wood. br Iron-on edge banding is wood veneer with hot-melt adhesive preapplied to the back. br You simply hold the edge banding in place, run over it with a household iron to heat the adhesive, let it cool and trim the edges flush. br br How To Use: (With Hot Melt Adhesive) /b br Tip 1:? Clean up the edges br Tip 2:? Iron on the edge banding br Tip 3:? Press it while it’s hot br Tip 4:? Slice off the ends br Tip 5:? Use a trimmer on edges br Tip 6:? Modify your trimmer br Tip 7:? Don’t leave a splice where it’ll show br Tip 8:? Touch up with a sanding block br br Colour: Black /b br Size: 3/4 inch x 50ft /b br Thickness: 0.5mm /b br Material: Melamine /b br Quantity: 1 Roll /b br”