Devcon 2 Ton Epoxy

Devcon 2 Ton Epoxy

• Clear, extremely strong, non-shrinking adhesive; formulated for high-clarity and good impact strength
• Waterproof; resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze
• Handling time: 30 minutes, Set time: 30 minutes, Cure time: 8-12 hours
• Temperature Range: -60F to 180F

Devcon Flow-Mix 2 Ton Epoxy is a clear, extremely strong, non-shrinking adhesive, specially formulated for high-clarity and good impact strength. The flow-mix nozzles automatically mix the resin and hardener together. For best results, pull plunger back slightly (1/8”) to allow air bubbles to rise to the top so that you do not push air bubbles into the Flow-Mix nozzle. To get an even flow of resin and hardener, push down evenly on the plunger. Apply the thoroughly mixed epoxy directly to your repair. It is good to place removable tape on the surrounding areas or surfaces that you do not want to get epoxy on. Before the epoxy cures, remove the tape. Bonds acrylic, china, fiberglass, metal, wood, concrete, ceramic, and glass with a tensile strength of 2500 PSI. Waterproof, with a Temperature Range of -40 degrees Fahrenheit to 200 degrees Fahrenheit.