Milescraft Drill Pump 750. 1314

Milescraft Drill Pump 750. 1314

• Works with most electrical drills with a maximum speed of 2,800 RPM
• Hose connection is 3/4″ and uses any standard garden hose
• Pumps up to 750 gallons per hour and is self-priming up to 12 feet
• The 3/8″ shank on this unit fits all common chucks for most drills
• Never run the DrillPump in reverse

The #1314 DrillPump 750 from Milescraft is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. Designed to work with most electrical drills, the unit pumps up to 750 gallons per hour, and has a maximum speed of 2,800 RPM. The 3/8″ shank on the pump will fit any drill with chuck capacity of 3/8″ or more. The hose connection is 3/4″ and works with any standard garden hose. Pump is self-priming up to 12 feet. Periodic Lubrication with common lithium grease is recommended. To apply, unscrew the side and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Imported NOTE: Do not get the drill wet, or use the drill pump with flammable liquids. California Proposition 65 Notice – WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.