Soiiw 110v 850w Led Microcomputer Electric Hot Plate Preheat Soldering Preheating Station Welder Hot Plate Rework Heater Lab

Soiiw 110V 850W LED Microcomputer Electric Hot Plate Preheat Soldering Preheating Station Welder Hot Plate Rework Heater Lab 200x200mm Plate

• Three-dimensional cooling hole design: multi-angle cooling design for better cooling effect
• High quality aluminum plate as the heater 30-400°C: multi-tube technology efficient heating tube ensures good heat transfer effect
• This item can be used to divide, repair cell phone screen, LED display, Component work, SMD reengineering work, PCB removing, soldering work

Specifications: Voltage: AC 110 ±10% Power: 850W Temperature range: 50-350 ° C Temperature display: 3 bites(display resolution: 1 °C) Constant temperature stability: ±1.5 – 0 °C Heating plate size: 200*200mm/7.87*7.87in Dimensions: 21.5*21.5*14cm/8.46*8.46*5.51in Package weight: 3287g Safety instructions: * Make sure the ground wire of the machine is well grounded! * Do not let the air flow blow directly on the board, otherwise it will affect the heating of the heater! * The table top with the constant temperature platform should be flat without tilt to maintain the level of the aluminum platform, and the desktop material must be heat resistant! * During the work process, the surface of the board and the surrounding area are very hot. Be careful to prevent burns and burns! * Do not use hot plates near flammable objects! * To move or touch the machine, remember to turn off the power and wait until the heating plate is completely cooled to room temperature! * This machine is a high temperature electric heating product. If you do not use the machine, please cut off the power supply to avoid danger and accident! * In order to prolong the life of the heating element and the machine, it is forbidden to use the machine for a long time at high temperature (above 300 °C). Under normal circumstances, the continuous working time of the machine should not exceed eight hours! * The ventilation window on the chassis of the constant temperature platform can not be blocked by foreign objects, to prevent its heat dissipation effect. Metal objects can not be inserted into the chassis from the ventilation window, which may cause electric shock! * Do not place in damp and corrosive places!